User manual SEVERIN LB 7220

[. . . ] If the appliance is used in different locations rather than in a fixed installation, the following should be noted: - Do not place the main unit above the bath during use. - In compliance with VDE safety directive 0100, the appliance - if installed in a bath or shower room must be mounted outside the safety zones as shown in diagram I. A lateral distance of 60 cm from the bath-tub must be maintained at all times. (We recommend a minimum distance of 1 meter. ) 5 - The appliance must be placed in such a way that it cannot accidentally be pushed or fall into the bath. [. . . ] In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The addresses can be found in the appendix to this manual. - - limits shown in diagram I. The template provided will help to mark the correct distance between the holes to be drilled on the wall. Before drilling, ensure that the wall section chosen is free of any internal pipes, electrical cables etc. Position the keyhole openings on the appliance (hose connection facing down) over the screw heads and push it slightly down. If necessary, the screws may have to be adjusted for positive mounting. Remote control The water-proof remote control has 3 function buttons. The timer button is used for activating the timer and adjusting its settings. Display / Indicator lights The display features three areas with indicator lights. The indicator lights on the left show the currently selected bubble intensity. Timer The timer allows you to set the time after which the appliance automatically switches off. 15, 30 or 60 minutes can be selected. 6 Before using for the first time Remove the appliance from its packaging and ensure that any packaging materials are completely cleared away. Wall mounting The appliance can be wall-mounted or placed on the floor. For wall mounting, proceed as follows: - We recommend mounting the appliance at a minimum distance of 1 m from the bath itself. To prevent the possibility of anyone using the bath coming into contact with the main unit, it should be mounted at a minimum height of 1. 8 m. Ensure at all times that the appliance is placed in such a way that it cannot accidentally fall into the bath, sink or toilet bowl. - The appliance must be connected to a wall socket located well outside the safety Operation - Place the air-mat in the bath and press the suction discs against the bottom of the tub. - Connect the end of the flexible hose marked with an arrow symbol to the connection point on the main unit and turn clockwise to lock. - Fit the other end of the hose into the connection point on the air-mat. - Insert the plug into a suitable wall socket well outside the safety limits shown in diagram I. [. . . ] Guarantee This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. [. . . ]