User manual SAMSUNG RF858VALASL
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG RF858VALASL. We hope that this SAMSUNG RF858VALASL user guide will be useful to you.
Manual abstract: user guide SAMSUNG RF858VALASL
Detailed instructions for use are in the User's Guide.
[. . . ] Refrigerator
user manual
English This manual is made with 100 % recycled paper.
imagine the possibilities
Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at
www. samsung. com/register
Free Standing Appliance
DA68-02836K(EN)-0. 0. indd 01
2013. 3. 20 3:34:56 PM
safety information
SAFETY INFORMATION
• Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Use this appliance only for its intended purpose as described in this instruction manual. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. [. . . ] Insert one Snap Ring only, Inserting two or more Snap Rings may cause the Snap Rings to slip out or make a rubbing noise. • Lift up the lower door and insert the Snap Ring into the space between the Door and the Hinge. • Keep the Snap Rings out of the reach of children and make sure that children do not play with them or put them into their mouths. • Two 1 mm, 1. 5 mm, 2 mm, and 2. 5 mm Snap Rings come with the Refrigerator. • If the Refrigerator is level before you load it with food, the Refrigerator may become unbalanced due to the weight of the food. • If you raise the door too far, it can rub against the Top Cover.
• If the Refrigerator is not level back and front, put a solid panel (such as a plastic panel, a plastic ruler, etc. ) on the floor where the rear legs will rest, and then fix it in place with plastic tape. When you push in the Refrigerator, make sure the rear legs rest on the panel. • If you have a wooden floor or similar soft floor, take care not to damage the floor when pushing the Refrigerator into place.
CAUTION
Snap Rings included with the refrigerator:
1 mm
1. 5 mm
2 mm
2. 5 mm
20_ setting up
DA68-02836K(EN)-0. 0. indd 20
2013. 3. 20 3:35:23 PM
HOW TO ADJUST THE DOOR GAP
If the gap between the left and right fridge compartment doors is not even. • You can adjust the gap by turning the bolt at the top right of the cold storage compartment door. You can break it.
• Water line installation kits are available at extra cost from your dealer. We recommend using a water line installation kit that contains copper tubing and 6mm (¼”) compression nut.
Connecting to the water supply line
1. With the doors closed, remove the 3 screws holding the top cover using a Phillips screwdriver, and then lift it off together with the connected cables.
2. Locate the nearest cold water drinking line and install the pipe clamp and shut off valve.
Cold water line Pipe clamp
Shut off valve
2. Connect the water line installation kit to the shut off valve.
Cold water line Water line installation kit Pipe clamp Shut off valve
) to narrow
INSTALLING THE WATER DISPENSER LINE
A water dispenser with a filter is one of the helpful features on your new refrigerator. To help promote better health, the water filter removes unwanted particles from your water. For the ice maker to operate properly, water pressure of 138 ~ 862 kPa is required. If the refrigerator is installed in an area with low water pressure (below 20 psi), you can install a booster pump to compensate for the low pressure. After you have connected the water line, make sure the water storage tank inside the refrigerator is properly filled. To do this, press the water dispenser lever until the water runs from the water outlet.
Connecting the water supply line to the refrigerator.
There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store.
For Copper Tubing For Plastic Tubing • ¼” plastic tubing • ¼” copper tubing • ¼” compression nut (1pc) → Molded end(Bulb) • Ferrule (2pc) • ¼” compression nut (1pc)
setting up _21
DA68-02836K(EN)-0. 0. indd 21
2013. 3. 20 3:35:25 PM
cut off 1/4“ of the plastic tubing to make sure you get a snug, leak-free connection. Under normal conditions, the water dispenser can fill a 170 cc cup in about 10 seconds.
Plastic Tubing (Assembled) Compression Fitting (Assembled) Molded end(Bulb) Compression nut (B) (1/4”) (Not supplied)
Copper tubing or (Not supplied)
Refrigerator
Compression Nut (1/4”) (Assembled)
Ferrule (Not supplied)
Plastic tubing (B) (Not supplied)
Household water supply line
1. Connect the household water line to the assembled compression fitting. [. . . ] Try moving those items to the other shelves in the fridge instead of keeping them in the colder areas or bins.
03 TROUBLESHOOTING
The food in the fridge is frozen.
You hear unusual noise or sounds.
• • • • •
Check that the refrigerator is level and stable. Is the back of the refrigerator too close to the wall, preventing proper ventilation?Try moving the back of the refrigerator at least 2 inches from the wall. It is normal and occurs because various accessories are contracting or expanding in response to temperature changes in the refrigerator interior. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG RF858VALASL
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG RF858VALASL will begin.