User manual SAMSUNG NP-N100
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG NP-N100. We hope that this SAMSUNG NP-N100 user guide will be useful to you.
You may also download the following manuals related to this product:
SAMSUNG NP-N100 (10483 ko)
Manual abstract: user guide SAMSUNG NP-N100
Detailed instructions for use are in the User's Guide.
[. . . ] User Guide
1 2 3 4
Getting Started Using the Computer Settings and Upgrade Appendix
Contents
Contents
Chapter 1. Getting Started
3 6 21 24 29 Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off
Chapter 1 Getting Started
1
Chapter 3. Settings and Upgrade
55 56 58 61 62 64 67 LCD Brightness Control BIOS Setup Setting a Boot Password Changing the Boot Priority Upgrading Memory Battery Using the Security Slot
Chapter 2. Using the Computer
32 38 41 43 45 48 49 50 51 53 Using MeeGoTM Keyboard Touchpad External-type CD drive (ODD, To be purchased) Multi Card Slot (Optional) Connecting an External Display Device (Optional) Adjusting the Volume Wired Network Wireless Network (Optional) Recover your computer
Chapter 4. [. . . ] The password is deactivated.
For some models the password is only canceled if the <Enter> key is pressed in the Setup Notice window.
Changing the Boot Priority
This computer is configured to boot from an external-type ODD first. As an example, the procedures to change the highest boot priority device to the hard disk drive are described below.
The screen images in this document may differ from actual product.
Chapter 3 Settings and Upgrade
61
3
Press the down key () to move to the AHCI HDD item and press the F6 key to move up to the top item.
Boot Device Priority
[Boot priority order] 1. [Excluded from boot order] - IDE HDD : N/A - IDE CD : N/A - PCI SCSI : N/A - USB ZIP : N/A - USB LS120 : N/A
1 2
Select the Boot menu in the BIOS Setup.
XXXXXXXX
Press <Enter> on the Boot Device Priority item.
4
Press the F10 key to save the settings and exit Setup. The highest boot priority device is now set to the Hard Drive.
Upgrading Memory
A memory is installed in the memory slot at the bottom of this computer. The procedures to replace the memory are described below.
· Replace new memory only after shutting the computer down completely. · The images used for the illustration are of a representative model, therefore the images may differ from the the actual product.
Chapter 3 Settings and Upgrade
62
Replacing the Memory
1
Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver.
Fixing Screw
Upgrading Memory
Chapter 3 Settings and Upgrade
63
2
Pull the memory module latches outward. Remove the memory module out at an angle of 30 degrees.
4
Push the memory module down so that it is completely fixed. If the memory does not fit easily, push the memory module down while pulling the memory module latches outward.
3
Insert a new memory module into the memory slot at an angle of approximately 30 degrees aligning it to the angle of the memory slot.
5
Close the memory compartment cover and fasten the screw.
Memory Slot
Battery
Please refer to the following instructions when running the computer on battery power without connecting the AC power. A Lithium-Ion smart battery is supplied with this computer.
· Carefully read and follow the precautions printed on the battery before using the battery. · Before using your computer for the first time after purchasing it, charge the battery completely. · Never heat the battery pack, put it near or in a fire or use at a temperature higher than 60°C, as this may cause fire. · Never cause a short circuit between the battery pack terminals or disassemble the battery pack. · Carefully read and follow the precautions printed on the battery and the safety instructions in the User Manual before using the battery. · Please refer to the system operation environment of this manual and operate and store the battery at room temperature.
Chapter 3 Settings and Upgrade
64
Charging the Battery
1
Attach the battery and connect the AC adapter to the DC-in jack of the computer. The battery will then start charging.
2
When charging is complete, the Charge LED turns green.
Status Charging Charging complete Charge LED Red Green Off
AC adapter not connected
Battery
Measuring the Remaining Battery Charge
You can view the battery charge status by completing the following procedures. If you move the mouse pointer over the battery icon in the system tray of the Desktop, the remaining battery charge is displayed.
Chapter 3 Settings and Upgrade
65
Extending the Battery Usage Time
Decreasing the LCD Brightness
Press the + keys on the keyboard to decrease the LCD brightness to extend the battery usage time.
Using the Battery Calibration Function
When charging/discharging the battery repeatedly for a short time only, the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display.
Battery Usage Time Information
A battery is an expendable supply, so when using it over a long time, the capacity/battery life is shortened. If the battery life is reduced to under half of its initial time, we recommend purchasing a new battery. When not using the battery for a long time, store the battery after charging it to 30-40% of its capacity. This extends the battery life time.
In this case, the actual battery charge and the remaining charge display will be the same by discharging the battery completely using the Battery Calibration function, and then recharging it again.
1 2
Disconnect the AC power adapter after turning off the computer. Restart your computer and press the F2 button when the Samsung logo appears, to start the BIOS Setup.
Battery
Chapter 3 Settings and Upgrade
66
3
XXXXXXXX Move to the Boot > Smart Battery Calibration item using the direction keys and press <Enter>.
Installing/Removing the Battery
1 2 4
Highlight Yes in the Battery Calibration Confirmation window and press <Enter>. The Battery Calibration function is activated and the battery is forcefully discharged. This operation requires 3~5 hours depending on the battery capacity and the remaining battery charge.
Shutdown the system, close the LCD panel and place the computer upside down on a flat surface. [. . . ] Since an LCD is implemented by transistors instead of a cathode-ray tube unlike a CRT, its size can be slim. MMC (MultiMedia Card) card This is an external-type flash memory used for mobile devices such as mobile phones or digital cameras. Network A group of computers and devices, such as printers and scanners, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG NP-N100
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG NP-N100 will begin.