User manual SAGEM FLP 3000-X
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAGEM FLP 3000-X. We hope that this SAGEM FLP 3000-X user guide will be useful to you.
You may also download the following manuals related to this product:
SAGEM FLP 3000-X (3288 ko)
SAGEM FLP 3000-X (3653 ko)
SAGEM FLP 3000-X DATASHEET (466 ko)
SAGEM FLP 3000-X DATASHEET (1037 ko)
Manual abstract: user guide SAGEM FLP 3000-X
Detailed instructions for use are in the User's Guide.
[. . . ] Do not place heavy objects or liquids on the top of the Use a vacuum cleaner to clean periodically the unit. ventilation slots and speaker grills or change the air filter Do not push objects of any kind through openings of this (see p15). Accumulated dust on the ventilation slots may projector as they may touch dangerous voltage points or cause the unit over-heated and lead to malfunction. LAMP REPLACEMENT Do not use the unit while the temperature is high or varies greatly. [. . . ] This may damage the projector.
Positioning
Please place the unit on a solid plat level surface.
Projection distance and image size
Ceiling installation
* The projector can be installed on the ceiling for education, conference and home entertainment applications. Please contact qualified service personnel or agent for further information or service.
The distance from projector lens to the screen will determine the size of the projected image. The maximum image size is about 282 ~ 366 inches diagonally at a distance of 15 meter. Please refer to the table below for the image size projected.
Projection Distance
Image Size (Diagonal) Wide (inch) Tele (inch)
(M)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
24 48 72 97 121 146 170 195 219 244 268 293 317 341 366
18 37 56 74 93 112 131 150 169 187 206 225 244 263 282
* "Wide" and "Tele" means the maximum and minimum image size diagonally at the same distance by adjusting lens to zoom.
4
CONNECTIONS
Connecting a computer or a notebook PC
Desktop PC or Notebook PC
DVI cable (Not supplied, optional) Monitor VGA cable (Accessory)
VGA cable (Accessory)
DVI-D
Video
Y
RGB in 1
Cb/Pb S-Video
RGB out
Audio
Cr/Pr Rs232 USB
RGB in 2
Audio cable (Not supplied, optional)
USB Mouse cable (Accessory)
VGA cable (Accessory)
Desktop PC or Notebook PC
* You can use the remote control as the PC mouse.
5
Connecting video equipments
Composite video images
Composite video cable (Accessory)
DVI-D
Video
Y
RGB in 1
LR Audio
VIDEO
Cb/Pb S-Video
RGB out
VCR/VCD/DVD player Digital camcorder
RGB in 2
Audio
Cr/Pr Rs232 USB
Audio cable (Accessory)
* Connecting a VCR/VCD/DVD player, digital camcorder by using a composite video cable S-Video images
S-Video cable (Not supplied, optional)
DVI-D
Video
Y
RGB in 1
LR Audio
S-VIDEO
Cb/Pb S-Video
RGB out
VCD/DVD player Digital camcorder
RGB in 2
Audio
Cr/Pr Rs232 USB
Audio cable (Accessory)
* Connecting a VCD/DVD player, digital camcorder by using a S-Video cable
6
Component images: YCbCr/YPbPr
Component YCbCr/YPbPr cable (Not supplied, optional)
DVI-D
Video
Y
RGB in 1
LR Audio
Y
Cb/Pb Cr/Pr
Cb/Pb S-Video
RGB out
DVD player
RGB in 2
Audio
Cr/Pr Rs232 USB
Audio cable (Accessory)
* Connecting a DVD player by using a component video cable (YCbCr/YPbPr)
7
BASIC OPERATION
Power On
1. Connect the power cord, and turn on the MAIN POWER switch.
The three indicators will flash once together, and the POWER indicator will light RED.
4. Press the POWER button.
The POWER indicator will flash GREEN for a while, and then light steadily.
5. Press the SOURCE button to select the input signal.
1
I 0
4
POWER indicator
Lamp Power Temp
SOURCE
POWER
POWER MENU LASER
ESC
U
ENTER
Menu
Source
L
R
3
Keystone
Volume
L D
MUTE AUTO
R
FREEZE
Auto
Esc
VOLUME ZOOM
Enter
6 2
DVI-D Video Y RGB in 1 Cb/Pb RGB out
SOURCE
5
S-Video
ON
Audio
Cr/Pr Rs232 USB
RGB in 2
--SOURCE SELECT-VGA1 VGA2 YPbPr YCbCr DVI VIDEO S-VIDEO
: Select or Enter : Confirm
Video Equipment Computer VCR/VCD/DVD Player Digital Camcorder DVD Player Set-top-box
Input Source RGB-in 1, 2 (VGA 1, 2) Video (Composite video images) S-Video (S-Video images) YCbCr (Component images) YPbPr (Component images)
8
Adjustment
Projection Angle
Lift the projector and press the adjuster buttons to adjust the projection angle. You can turn the bases of the adjuster legs to adjust the angle slightly.
Adjuster Button
up
down
Adjuster Legs
Image Size & Focus
Turn the focus/zoom ring to adjust the image focus and size.
Zoom Ring
Focus Ring
Other Functions
The hot keys on the control panel or remote control
Control Panel
Lamp Power Temp
Remote Control
3
MUTE
2
AUTO
4
FREEZE
Menu
Source
VOLUME ZOOM
1 2
Keystone
Volume
5 5 6
Auto
Esc
Enter
1. Keystone --- Keystone adjustment Press the KEYSTONE button and
to correct the keystone distortion.
2. Auto --- Automatic screen adjustment When the AUTO button is pressed, the image will be adjusted automatically in accordance with the signal being input. Mute --- Muting the sound temporarily Press the button again to restore the sound. Volume --- Adjusting the volume of the projector's speaker Press VOLUME +/- (remote control) or (control panel) to adjust volume. Zoom --- Enlarging the projected image Use ZOOM +/- to change the enlargement ratio. Press the POWER button twice to turn off the power.
To prevent mis-operation, a confirmation message appears when POWER is pressed once. Wait until the POWER indicator lights RED steadily (until the cooling fan stops).
Be careful not to cut power to the projector while the cooling fan is still running.
3. Use to select a main menu item, and then press to enter the selected sub-menu. Use to select a sub-menu item, and then press to enter an individual adjustment screen or the next menu level. Use to adjust the setting, and to select an item.
Input Source
YCbCr
Main Menu Item
IMAGE
BRIGHTNESS CONTRAST SHARPNESS POSITION SATURATION TINT 63 61 50 H. Press to return to the previous menu level.
Main Menu
Back
Select
Next/Execute
Sub-Menu
6. To close the menu, press ESC.
List of Functions IMAGE
Sub-menu BRIGHTNESS CONTRAST SHARPNESS POSITION SATURATION TINT PHASE Function Adjust the image brightness. Adjust clock phase if any banding noise.
12
SETTING
Sub-menu FREEZE SOURCE PIP MODE Function Freeze animated image. Set the language for OSD.
LANGUAGE
AUDIO
Sub-menu VOLUME MUTE Function Adjust the volume. [. . . ] Attach the air filter and install the filter cover.
Filter Cover
15
REPLACING THE LAMP UNIT
Under normal usage, the lamp life time of the projector is about 1500 hours. User can check the used lamp life status in the MANAGEMENT MENU of OSD. User can consult qualified agent or manufacturer for model of lamp cartridge and purchase new ones for replacement. Hold the handle and pull the lamp cartridge up carefully to remove it.
Handle
WARNING
* THE POWER CORD MUST BE DISCONNECTED to prevent the danger of electric shock while user replacing the lamp cartridge. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SAGEM FLP 3000-X
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAGEM FLP 3000-X will begin.