User manual RYOBI SW104AA

[. . . ] Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials, or items containing hair spray, nail polish remover or similar substances. Keep the area around the air intake (toekick) and adjacent surrounding areas free from lint, dust and dirt. The interior of the machine and exhaust duct should be cleaned periodically by qualified personnel. Items contaminated with oils may contribute to a chemical reaction that could cause the laundry to catch fire. fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Read all instructions before using the appliance. Do not dry articles that have been previously cleaned, washed, soaked or spotted with gasoline, dry-cleaning solvents or other flammable or explosive substances. [. . . ] Indicator light: on = buzzer selected off = buzzer not selected Adjusting the buzzer volume: ­ the dryer must be on ­ the door closed ­ a program selected ­ if the "Buzzer" indicator is lit, press the "Buzzer" button so its indicator light goes out. In the "Wrinkle-free" program, only "More Dry", "Normal" and "Less Dry" can be selected. ^ Press and hold the "Buzzer" button until its indicator lights and you hear the desired volume and tone. 10 Using the dryer 6. At the end of a program The "Anti-crease/End" indicator will light at the end of a program and the buzzer will sound if it was selected. Once the program starts, the current cycle of the program will be indicated in the "STATUS" display. See "Frequently asked questions" for details. ^ Press the "Door" button. ^ Close the door. ^ Press the "On/Off" button to turn off the dryer. 11 Using the dryer Canceling or changing a program ^ Press and release the "Start/Stop T" button to stop the drying program. To continue drying: ^ Select the new program by pressing the e or - button. ^ Select a dryness level (available in the "Normal" and "Wrinkle-free" programs). ^ Press and release the "Start/Stop T" button to start the new program. Adding or removing laundry during a program ^ Turn off the dryer using the "On/Off" button. ^ Open the door. , CAUTION - Do not touch the rear of the drum while adding or removing items!Select the dryness level ^ Press the selection button until the desired indicator illuminates. At the end of a program The "Anti-crease / End" indicator will light. ^ Press the "On/Off" button to turn off the dryer. Quick Guide Program Normal Extra Dry When to use For laundry to be folded and shelved immediately, e. g. For items to be left damp for ironing. Note The "Extra Dry" program should not be selected for jersey materials. Items may shrink. Available drying options: Turbo, Full load, Gentle, Anti-crease More Dry Normal Less Dry Hand Iron Rotary Iron If items are still damp, dry again using "More Dry". If fabrics are too damp, dry again using "Less Dry". For items to be ironed with a rotary iron. For items which require ironing. To prevent moisture loss, roll up the laundry until ready to iron. Wrinkle-free Available drying options: Turbo, Gentle, Anti-crease More Dry Normal Less Dry Reduce load size for fabrics that wrinkle easily. Special Programs Available drying options: Anti-crease only available in Fluff, Sturdy Woolens Delicate items which allow machine drying. Take items out immediately after the end of the program while still slightly damp. Allow items to air dry. Smooth Sturdy Fluff - TIMED CYCLES Available drying options: Gentle, Anti-crease 20 min 30 min - Technical Service In the event of a fault you cannot fix yourself, please contact the Miele Technical Service Department U V 1-800-999-1360 techserv@mieleusa. com 1-800-565-6435 service@miele. ca PC Update The indicator on the control panel marked PC allows a technician to update the dryer to make use of new technology. For example, if new programs or fabrics are developed, a service technician will be able to modify the existing program cycles accordingly. When contacting Technical Service, please quote the model and serial number of your appliance. They can be found on the data plate located below the drum opening. 19 20 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and could void the warranty. [. . . ] Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. The dryer comes with a 5 ft long, 12/4 AWG cord and a NEMA 14-30 P plug. It should be connected to a 120/208-240 V, 15 A, 60 Hz AC power supply. [. . . ]