User manual RYOBI RY46501A
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RYOBI RY46501A. We hope that this RYOBI RY46501A user guide will be useful to you.
You may also download the following manuals related to this product:
RYOBI RY46501A (4763 ko)
RYOBI RY46501A 1 (482 ko)
RYOBI RY46501A 1 (483 ko)
Manual abstract: user guide RYOBI RY46501A
Detailed instructions for use are in the User's Guide.
[. . . ] OPERATOR'S MANUAL
ELECTRIC CULTIVATOR
RY46501A
Your electric cultivator has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using
this product. Thank you for buying a Ryobi product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
TABLE OF CONTENTS
n Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n General Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter's Laboratories (UL) should be used. 120 V, 60 Hz, AC only, 12 Amps Sand Tank Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SWITCH LOCK-OUT
SWITCH TRIGGER
PLUG CONNECTOR
EXTENSION CORD RETAINER RINGS
TINE SHIELD JUST ADD SANDTM DRAG BAR
HITCH PIN OUTER TINE OUTER TINE INNER TINES WHEEL ASSEMBLY ACCESSORY
Fig. Before attempting to use this product, familiarize yourself with all operating features and safety rules.
SWITCH LOCK-OUT
The switch lock-out prevents accidental starting of the cultivator.
JUST ADD SANDTM
Putting sand in the sand tank allows greater stability when operating the cultivator, and also gives added weight to the machine, allowing it to cultivate with less effort and vibration.
SWITCH TRIGGER
The switch trigger starts and stops the rotation of the tines.
8
ASSEMBLY
UNPACKING
This product requires assembly. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-860-4050 for assistance.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
POSITIONING THE HANDLEBAR
See Figure 2. Do not allow the switch cable to become pinched when raising the handlebar. HANDLEBAR KNOBS HANDLEBAR
PACKING LIST
Cultivator Drag Bar Pull Pin Hitch Pins (2) Felt Washers (2) Inner Tines (2) Outer Tines (2) Wheel Assembly (Accessory) Operator's Manual Warranty Registration Card
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to heed this warning could result in possible serious personal injury.
SWITCH CABLE
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. 2
9
ASSEMBLY
INSTALLING THE WHEEL ASSEMBLY ACCESSORY
See Figures 3 - 4. Use the wheel assembly accessory to transport the unit to and from the work area. To install: n Raise the adjustment knob located at the back of the tine shield. n Insert the wheel assembly support rod into the opening beneath the adjustment knob. To place the wheels in a high position, insert the rod to the first hole. n Rotate the adjustment knob in the opposite direction to return it to the seated position, which will secure the wheel assembly in place. n Insert the drag bar into the open slot in the wheel assembly support rod. n Insert pull pin through holes in support rod, passing through desired hole in drag bar, to secure drag bar at desired height. [. . . ] n The wheel assembly accessory may be installed in position B to allow use of the drag bar during cultivating. The drag bar may be used to help control the cultivator's speed and depth of operation. It is located in a slot on the wheel assembly support and is secured with a pull pin. n Shift the drag bar up or down, depending on the depth you are trying to achieve. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RYOBI RY46501A
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RYOBI RY46501A will begin.