User manual RYOBI RBV26

[. . . ] Let hot ingredients cool down before chopping them or pouring them into the jar (max. Temperature 80cC/175cF, especially for recipes with large quantities of oil or fat). Reduce risk of injury to persons, never place mixing blades on base without blender jar properly attached. If the glass jar is very cold, rinse it well with lukewarm water before pouring in hot liquid. [. . . ] The motor only starts if the blender jar has been assembled properly onto the motor unit. Never touch the blade unit when it is assembled on the appliance when the appliance is plugged in. avoid touching the cutting edges of the blade units when cleaning them. When removing the blender jar from the motor unit, take care not to unscrew the glass jar from the blade unit as this will cause the ingredients to leak from the blender jar. Tip: You can get fresh and delicious fruit juices by means of the fruit filter which can be purchased at your local Philips Service Centre. Push excess mains cord back into the cord storage compartment on the right side of the appliance. Mount the blender jar onto the blade unit and turn it in the direction of the arrow until it is fixed. Only remove the lid (by pulling it off the blender jar) for cleaning purposes. To avoid spillage, always insert the stopper into the lid before you start processing. The different buttons allow you to obtain optimal results with different ingredients. The buttons are represented by icons, which correspond to specific speeds suitable for processing specific ingredients. If you are not satisfied with the result when blending solid ingredients, stir the ingredients with a spatula (not while the blender is running!You can use the filter accessory to obtain extra finely blended sauces, fresh fruit juices or cocktails. Make sure that the blender jar is disconnected from the motor unit before you assemble the filter into the blender jar. Make sure that the bottom of the filter is properly fitted into the jar. For optimal results, put the jar with the remaining ingredients back onto the appliance and let it run for a few more seconds. Particularly when you are processing large quantities, we advise you not to put all the ingredients in the filter at the same time. Start processing a small quantity, let the appliance run for a moment, switch it off, empty the jar and the add another small quantity. For making soy milk: Soak soy beans for 4 hours before processing them. For making fruit juices and cocktails: Do not fill up beyond the metal part of filter. Cleaning of the appliance, its parts and the accessories is easiest immediately after use. Never clean the accessories or parts of the appliance in the dishwasher. [. . . ] The blender jar can also be cleaned by means of the Quick Clean function. Pour lukewarm water and some washing-up liquid into the blender jar, up to 1/2 of the jar. CAUTION: Handle the cutting blades with extreme care and caution They are sharp and may cause injury. Press the QUICK CLEAN button and let the appliance run for a few moments. [. . . ]