User manual RYOBI RBC30SES

[. . . ] Save operators manual and review frequently for continuing safe operation, and instructing others who may use this tool. For safe operation, read and understand all instructions before using the trimmer/brushcutter. Failure to follow all safety instructions listed below, can result in serious personal injury. Never start or run the engine in a closed or poorly ventilated area; breathing exhaust fumes can kill. [. . . ] Always stop the engine and remove the spark plug wire before attempting to remove any obstruction caught or jammed in the blade or before removing and installing the blade. A coasting blade can cause injury while it continues to spin after the engine is stopped or throttle trigger released. Maintain proper control until the blade has completely stopped rotating. Always make sure blade is installed correctly and securely fastened before each use. Use only the manufacturer's replacement TRI-ARC blade intended for use on this brushcutter. Blade thrust is the reaction that may occur when the spinning blade contacts anything it cannot cut. This contact may cause the blade to stop for an instant, and suddenly "thrust" the unit away from the object that was hit. This reaction can be violent 14 RBC30SES Weight (kg) - Without fuel, cutting attachment and guard - Without fuel with string head - Without fuel with blade Fuel tank volume [cm3 or (L)] Cutting swath (mm) - String head - Blade Recommended torque for blade (Nm) Engine displacement (cm3 / cc) Line diameter for Reel EasyTM Head (mm) Line diameter for Pro Cut llTM Head (mm) Maximum engine performance (in accordance with ISO 8893) (kW) Maximum rotational frequency of the the spindle (min-1) Engine speed (rotational frequency) at recommended max. Spindle rotational frequency (min-1) Engine speed (rotational frequency) at idle (min-1) Fuel consumption (in accordance with ISO 8893) at max. Engine performance [kg/h or (L/h)] Specific fuel consumption (in accordance with ISO 8893) at max. H)] Vibration level idling (Trimmer) (m/s2) - Front handle / Left handle - Rear handle / Right handle Vibration level racing (Trimmer) (m/s2) - Front handle / Left handle - Rear handle / Right handle Vibration level idling (Brush Cutter) (m/s2) - Front handle / Left handle - Rear handle / Right handle Vibration level racing (Brush Cutter) (m/s2) - Front handle / Left handle - Rear handle / Right handle Sound pressure level at operator's ear (in accordance with EN 27917) dB (A) Sound power level (in accordance with ISO 10884) dB (A) 5. Read the operation manual and follow all warnings and safety instructions. Keep all bystanders, especially children and pets, at least 15 m from the operating area. If petrol or lubricant comes in contact with the eyes, wash them immediately with clean water. WARNING If any parts are damaged or missing, do not operate this tool until the parts are replaced. WARNING Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts. WARNING Never attach or adjust any attachment while power head is running. WARNING Be certain the knob is fully tightened before operating equipment; check it periodically for tightness during use to avoid serious injury. This product is powered by a 2-stroke engine and requires pre-mixing petrol and 2-stroke lubricant. Premix unleaded petrol and 2-stroke engine lubricant in a clean container approved for petrol. [. . . ] Deterioration caused by normal wear and tear, unauthorised or improper use or maintenance, or overload are excluded from this guarantee as are accessories such as battery packs, light bulbs, blades, fittings, bags, etc. In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. This warranty in no way affects your legal rights concerning defective products. the above warranty is valid in the UK , the European Union , and Australia only. [. . . ]