User manual RYOBI JSE-60A

[. . . ] To ensure your safety and satisfaction, carefully read through this OWNER'S MANUAL and the SAFETY INSTRUCTIONS before using the product. In this case, sound insulation and hearing protection measures must be taken by the operator. [. . . ] ACCESSORIES : The use of accessories or attachments other than those recommended in these instructions might present a hazard. This tool is started and stopped by depressing and releasing the switch (5). For continuous operation, press the lock button (6) on the side of the switch while switch is depressed. (JSE-60A) With the use of the electronic control circuit, the speed can be freely adjusted within the range of 1, 000 to 3, 000min-1 , and high power can be selected from the six-step speed adjusting dial(7). Use blades suitable for the material to be cut for efficient and safe operation. Make sure the saw blade is tightly secured, as described in the operation instructions. It is extremely dangerous to point the cutting surface towards any person. Length of stroke Cutting capacities in wood in steel in aluminum Input Strokes per minute Overall length Net weight JSE-60A 26 mm (1") 60 mm (2-3/8") 6 mm (1/4") 20mm (13/16") 400 W 1, 000-3, 000 min-1 265mm (10-7/16") 2. The general rules for cutting speed apply: the harder the material, the lower the speed :the softer the material, the higher the speed. In cases of small circle or arc cutting, use a lower cutting speed than for ordinary straight cutting. Too much pressure may break the blade when cutting in a circular motion. A cutting oil or emulsion should be used when cutting steel, and a turbine oil should be used for non-metallic materials like aluminum. [. . . ] EN60745, EN55014, EN61000 in accordance with the regulations 98/37/EC and 89/336/EEC Sound pressure level (No load) 85 dB(A) Sound power level (No load) 96 dB(A) The weighted root mean square acceleration value less than 2. Machine : JIG SAW Type : JSE-60A, JS-60AV Representative name of company : RYOBI LIMITED address : HEAD OFFICE 762 MESAKI-CHO, FUCHU-SHI HIROSHIMA 726-8628, JAPAN telephone number : (0847)41-1273 name/title : Yukimasa Takenaka General Manager Power Equipment Division [. . . ]