User manual RYOBI G-1156

[. . . ] To ensure your safety and satisfaction, carefully read through this OWNER'S MANUAL and the SAFETY INSTRUCTIONS before using the product. Make sure that the tool is only connected to the voltage marked on the name plate. [. . . ] Any places with chips or cracks will result in a different sort of sound. When mounting new grinding wheels, a no-load rotation test must be carried out for approximately 5 minutes with the grinding wheel facing in a safe direction, i. Ensure that the grinding wheel is correctly mounted and tightened before use and run the tool at no-load speed for 30 seconds in a safe position. Stop immediately if there is considerable vibration or if other defects are detected. Do not use separate reducing bushings or adapters to adapt large hole grinding wheels. Use other personal protective equipment such as gloves, apron and helmet when necessary. Never place the tool on the floor or other surfaces while it is running. Never touch the wheel or place it on the floor or other surfaces while it is rotating. (If the paper has been previously removed, insert some soft paper or rubber between grinding wheel and flange. Ensure that ventilation openings are kept clear when working in dusty conditions. If it should become necessary to clear dust, first disconnect the tool from the mains supply (use nonmetallic objects) and avoid damaging internal parts. It is recommended that you take this tool to a Ryobi Authorized Service Center for a through cleaning and lubrication at least once a year. [. . . ] La valeur d'accelération de la moyenne quadratique pondée 2, 34 m/s2 2, 70 m/s2 DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. EN50144, EN55014, EN61000 in accordance with the regulations 98/37/EC, 73/ 23/EEC and 89/336/EEC G-1156 Sound pressure level 84 dB(A) Sound power level 97 db(A) G-1256 85 dB(A) 98 dB(A) Machine : ANGLE GRINDER Type : G-1156, G-1256 Representative name of company : RYOBI LIMITED address : HEAD OFFICE 762 MESAKI-CHO, FUCHU-SHI HIROSHIMA 726-8628, JAPAN telephone number : (0847)41-1273 name/title : Yukimasa Takenaka General Manager Power Equipment Division [. . . ]