User manual RYOBI EMS1021 SCHEMA

[. . . ] Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Ensure the switch is in the off-position before connecting to power source, picking up or carrying the tool. [. . . ] Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. SAFETY INSTRUCTIONS FOR JIG SAWS Always keep the cord away from moving parts of the tool; direct the cord to the rear, away from the tool If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect the plug Never use tool when cord is damaged; have it replaced by a qualified person Do not work materials containing asbestos (asbestos is considered carcinogenic) Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful (contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders); wear a dust mask and work with a dust extraction device when connectable Certain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in conjunction with additives for wood conditioning; wear a dust mask and work with a dust extraction device when connectable Follow the dust-related national requirements for the materials you want to work with Do not use a saw blade which is cracked, deformed or dull Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held more securely than by hand) Keep hands away from the saw blade while the tool is in use Remove all obstacles on top of as well as underneath the cutting path before you start cutting Always disconnect plug from power source before making any adjustment or changing any accessory Wear protective goggles when working with materials which produce chips Avoid damage that can be caused by screws, nails and other elements in your workpiece; remove them before you start working Check the functioning of the tool before each use and, in case of a defect, have it repaired immediately by a qualified person; never open the tool yourself Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool (tools with a rating of 230V or 240V can also be connected to a 220V supply) When used outdoors, connect the tool via a fault current (FI) circuit breaker with a triggering current of 30 mA maximum, and only use an extension cord which is intended for outdoor use and equipped with a splashproof coupling-socket The noise level when working can exceed 85 dB(A); wear ear protection When you put away the tool, switch off the motor and ensure that all moving parts have come to a complete standstill RYOBI can assure flawless functioning of the tool only when the correct accessories are used which can be obtained from your RYOBI dealer Use completely unrolled and safe extension cords with a capacity of 16 Amps (U. K. 13 Amps) In case of electrical or mechanical malfunction, immediately switch off the tool and disconnect the plug This tool should not be used by people under the age of 16 years WHEN CONNECTING NEW 3-PIN PLUG (U. K. ONLY): Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of the plug If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left unattended USE On/off 4 Changing saw blades 5 !insert blade to full depth with teeth facing forward 6 Mounting/removing of vacuum cleaner adapter 7 Sawing at 15/30/45 8 Adjusting sawing speed to material used 9 !if the tool does not run with wheel C in position 1, select a higher sawing speed and lower the sawing speed while the tool runs Selecting sawing mode 0 Use lever D 2 for adjusting the orbital action from accurate cutting (= 0) to fast cutting (= MAX) - 1 setting ("0") for accurate cutting in all materials, straight + curved 8 - 4 settings for fast cutting in different materials, straight cuts only 1 = metal 2 = plastic 3 = hard wood 4 = soft wood !always select "0" when sawing splinter-sensitive material Dust suction !a - mount vacuum cleaner adapter B - slide switch E in "O" position !A miszaki dokumentci a kvetkezOE helyen tallhat: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. CZ CE STRVZUJC PROHLEN Potvrzujeme na odpovdnost, e tento vrobek odpovd nsledujcm normm nebo normativnm podkladm: EN 60 745, EN 55 014, podle ustanoven smrnic 2006/95/ES, 2004/108/ES, 98/37/ES (do 28. 12. 2009), 2006/42/ES (od 29. 12. 2009). HLUNOSTI/VIBRAC Meno podle EN 60 745 in tlak hlukov vlny tohoto pstroje 92 dB(A) a dvka hlunosti 103 dB(A) (standardn odchylka: 3 dB), a vibrac m/s2 (metoda ruka-pae). Technick dokumentace u: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. TR CE STANDARDIZASYON BEYANI Yeane sorumlu olarak, bu rnn aflaidaki standartlara veya standart belgelerine uygun olduunu beyan ederiz: EN 60 745, EN 55 014, ynetmelii hkmleri uyarinca 2006/95/EG, 2004/108/EG, 98/37/EG (28. 12. 2009 tarihine kadar), 2006/42/EG (29. 12. 2009 tarihinden itibaren). / GRLT/T<TREfiIM llen EN 60 745 gre ses basinci bu makinanin seviyesi 92 dB(A) ve al>flma s>ras>ndaki grlt 103 dB(A) (standart sapma: 3 dB), ve titreflim m/s2 (el-kol metodu). Teknik belgelerin bulunduu merkez: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. PL OWIADCZENIE ZGODNOCI CE Niniejszym owiadczamy ponoszc osobist odpowiedzialno, e produkt wykonany jest zgodnie z nastpujcymi normami i dokumentami normalizujcymi: EN 60 745, EN 55 014, z godnie z wytycznymi 2006/95/EU, 2004/108/EU, 98/37/EU (do 28. 12. 2009), 2006/42/EU (od 29. 12. 2009). HAASU/WIBRACJE Pomiarw dokonano zgodnie z norm EN 60 745 cinienie akustyczne narzdzia wynosi 92 dB(A) za poziom mocy akustycznej 103 dB(A) (poziom odchylenie: 3 dB), za wibracje m/s2 (metoda do-rka). Dokumentacja techniczna: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. RU , : EN 60 745, EN 55 014, 2006/95/EC, 2004/108/EC, 98/37/EC ( 28. 12. 2009), 2006/42/EC ( 29. 12. 2009). / co o EN 60 745 92 (A) e - 103 (A) ( : 3 dB), /2 ( ). CE , : EN 60 745, EN 55 014, 2006/95/EG, 2004/108/EG, 98/37/EG 28. 12. 2009 p. ), 2006/42/EG ( 29. 12. 2009 p. ). : RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. UA GR CE YMBATOT : EN 60 745, EN 55 014, 2006/95/EK, 2004/108/EK, 98/37/EK ( 28. 12. 2009), 2006/42/EK ( 29. 12. 2009). Y / Y EN 60 745 92 dB(A) o 103 dB(A) ( : 3 dB), m/s2 ( / ). [. . . ] BUCI/ VIBRACIJAMA Mjereno prema EN 60 745, prag zvunog tlaka ovog elektrinog alata iznosi 92 dB(A) a jakost zvuka 103 dB(A) (standardna devijacija: 3 dB), a vibracija m/s2 (postupkom na aci-ruci). Tehnika dokumentacija se moe dobiti kod: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. SRB CE IZJAVA O USKLA ENOSTI Pod punom odgovornou izjavljujemo da je ovaj proizvod usklaen sa sledeim standardima ili standardizovanim dokumentima: EN 60 745, EN 55 014, u skladu sa odredbama smernica 2006/95/EG, 2004/108/EG, 98/37/EG (do 28. 12. 2009), 2006/42/EG (od 29. 12. 2009). BUKA/VIBRACIJE Mereno u skladu sa EN 60 745, nivo pritiska zvuka ovog alata iznosi 92 dB(A), a jaina zvuka 103 dB(A) (normalno odstupanje: 3 dB), a vibracija m/s2 (mereno metodom na aci-ruci). Tehnika dokumentacija kod: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. SLO IZJAVA O USTREZNOSTI CE Odgovorno izjavljamo, da je ta izdelek v skladu z naslednjimi standardi ali standardnimi dokumenti: EN 60 745, EN 55 014, v skladu s predpisi navodil 2006/95/ES, 2004/108/ES, 98/37/ES (do 28. 12. 2009), 2006/42/ES (od 29. 12. 2009). [. . . ]