User manual RYOBI EID-800-2RE

[. . . ] Never touch the blade, drill bit, grinding wheel or other moving parts during use. Never start a tool when its rotating component is in contact with the work piece. Never lay a tool down before its moving parts have come to a complete stop. [. . . ] Protective gloves and non-skid footwear are recommended when working outdoors. Never touch the chuck or metal body parts when drilling walls, floors, or other surfaces covering electrical wiring. While operating, the work piece must be securely held with a vice or clamp to prevent it from moving due to the drill rotation. Voltage Chuck capacity Drilling capacity in wood in steel in masonry Input No load speed high low Blows per minute high low Weight Safety class II 230 V - 240 V ~ 50 Hz 13 mm (1/2") 30 mm 13 mm 16 mm 800 W 0 - 3, 000 min-1 0 - 1, 000 min-1 0 - 48, 000 min-1 0 - 16, 000 min-1 3 kg This tool is started and stopped by squeezing and releasing the trigger switch (A). The speed can be adjusted in either gear by controlling the force applied to the trigger. The maximum speed of the drill may be set at different speeds by adjusting the variable speed selector (D). For continuous operation, press the lock button (E) while squeezing the trigger. To change the direction of rotation, stop the tool and push the forward / reverse button (B). When the forward button is pushed in, the bit rotates clockwise when viewed from the handle end of the tool. For easy changing of the drill bit this drill is equipped with an automatic spindle lock (M) which holds the spindle stationary when loosening and tightening the chuck. WARNING Always be sure the spindle lock button is released and the spindle lock is disengaged before turning the drill ON. Insert the drill bit (J) into the chuck as far as the plain part of its shank will go. In this case, sound insulation and hearing protection measures must be taken by the operator. " By turning the handle grip in direction L, the stopper pole can be released and the depth adjusted. [. . . ] Deterioration caused by normal wear and tear, unauthorised or improper use or maintenance, or overload are excluded from this guarantee as are accessories such as battery packs, light bulbs, blades, fittings, bags, etc. In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. This warranty in no way affects your legal rights concerning defective products. [. . . ]