User manual RYOBI EBS-1310V

[. . . ] Be sure to check the nameplate on the product, because the voltage is subject to change depending on the area in which the product is to be used. Front handle Sanding belt Tension release lever Rear handle Dust bag Dust point 7. [. . . ] In this case, sound insulation and hearing protection measure must be taken by the operator. This tool is started and stopped by squeezing and releasing the trigger (8/18). For continous operation, press the lock-on button (7/17) while trigger is being squeezed. The belt speed can be freely adjusted from 240 to 400 m/min by turning the speed adjusting dial (20) (EBS-9576V / EBS-1310V) (A = lowest speed / F = highest speed) Keep the cord away from the rotating abrasive belt. Do not place the tool on a surface while the belt is still moving since belt rotation will cause it to move, and may result in the tool being damaged or personal injury. Clamp the work piece if it does not remain stationary due to its own weight. Although the dust bag has a substantial capacity, it should be emptied frequently. When sanding metal, the dust bag should not be used, because of the risk of fire from flying sparks. Place the tool on its side and lift the lever (3/13) to retract the front roller and release the belt tension (Fig. If the belt tension is not released after lifting the lever, loosen the adjustment knob (9/19) (Fig. Be sure that the arrow inside of the belt is pointing in the same direction as that of the tool. Put the sanding frame on the belt sander and attach four slot into slot holder (25). [. . . ] I händelse av felaktig funktion medan garantin är i kraft skall produkten sändas UTAN ATT DEMONTERAS tillsammans med inköpsbeviset till leverantören eller till närmaste servicecenter som auktoriserats av Ryobi. Niveau de pression acoustique 87 dB(A) Niveau de puissance acoustique 100 dB(A) Valeur d'accélération de la moyenne quadratique pondérée poignée arrière 5, 2 m/s2 poignée avant 8, 5 m/s2 Sound pressure level 87 dB(A) Sound power level 100 dB(A) Weighted root mean square acceleration value rear handle 5, 2 m/s2 front handle 8, 5 m/s2 Schalldruckpegel 87 dB(A) Schallleistungspegel 100 dB(A) Beschleunigung des quadratischen gewogenen Mittelwerts Griff hinten 5, 2 m/s2 Griff vorne 8, 5 m/s2 Nivel de presión acústica 87 dB(A) Nivel de potencia acústica 100 dB(A) Valor de aceleración de la media cuadrática ponderada Asa trasera 5, 2 m/s2 Asa delantera 8, 5 m/s2 2 dB(A) Sound power level Weighted root mean square acceleration value 2. [. . . ]