User manual RYOBI CJSP-1801QEOM

[. . . ] Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. nOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment. Read the operation manual and follow all warnings and safety instructions. WARNING Do not attempt to operate this tool until you have read thoroughly and understood completely all instructions, safety rules, etc. [. . . ] Ensure that batteries are charged using the correct charger recommmeded by the manufacturer. Incorrect use may result in a risk of electric shock, overheating or leakage of corrosive liquid from the battery. NOTE: This tool is only designed to work with T shank blades, other types of saw blades are not guaranteed to work properly. Before attempting to use your Orbital jigsaw familiarize yourself with all operating features and safety requirements. WARNING Carefully read through this entire owner's manual before using your new tool. pay close attention to the Rules For Safe Operation , Warnings and Cautions. If you use your orbital jigsaw properly and only for what it is intended, you will enjoy years of safe, reliable service. WARNING If any parts are missing, do not operate your saw until the missing parts are replaced. Remember that a careless fraction of a second is sufficient to inflict severe injury. WARNING Failure to remove battery pack from saw could result in accidental starting causing possible serious personal injury. WARNING Always remove battery pack from your saw when you are assembling parts, making adjustments, assembling or removing blades, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. Your saw is equipped with a "lock-off" button which reduces the possibility of accidental starting. the lockoff button is located on the handle above the switch trigger. You must depress the lock-off button in order to pull the switch trigger. Note: You can depress the lock-off button from either the left or right side. Make sure the latch of your battery pack snap in place and battery pack is secured in saw before beginning operation. CAUTION When placing battery pack in your saw, be sure raised rib inside saw aligns with groove on battery pack and latch snap in place properly. To turn your saw ON, depress the lock-off button and pull switch trigger. This tool has a variable speed switch that delivers higher speed with increased trigger pressure. As shown in Figure 2, the blade storage area is located on the back of your saw and the hex key storage area is located on the base. They are convenient for storing extra blades, storing blades when not in use, and storing the hex key provided with your saw. [. . . ] WARNING Do not at any time let brake fluids, petrol, petroleumbased products, penetrating oils, etc. WARNING Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. This tool is in accordance with the relevant safety requirements, repairs should only be carried out by qualified person, otherwise this may result in considerable danger to the user. [. . . ]