User manual RYOBI CDI-1803

[. . . ] 3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment 7 b) of inattention while operating power tools may result in serious personal injury. [. . . ] Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injuries to person. To reduce risk of damage to charger body and cord, pull by charger plug rather than cord when disconnecting charger. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage and stress. Use of improper extension cord could result in a risk of fire and electric shock. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Do not disassemble charger; take it to a qualified serviceman when service or repair is required. To reduce risk of electric shock, unplug the charger from outlet before attempting any maintenance or cleaning. Refer to them frequently and use them to instruct others who may use this unit. Model Voltage Chuck (mm) Switch No load speed (drill mode): - Lo speed (min-1) - Hi speed (min-1) - Super-Hi speed (min-1) No load speed (impact mode): - Lo speed (min-1) - Hi speed (min-1) - Super-Hi speed (min-1) Max. Keyless chuck Switch trigger Direction of rotation selector (Forward/Reverse) Screwdriver bits Battery pack Depth gauge Rod Auxiliary handle Latches Depress latches to release battery pack To Tighten To Loosen Drill bit Drilling Depth To Decrease torque To Increase torque Torque adjusting Ring Drill mode Impact mode Reverse Forward Chuck jaws Unlock (release) Lock (tighten) Battery Charger Green Light Red Light 9 CHARGING YOUR BATTERY PACK The battery pack for your tool has been shipped in a low charge condition to prevent possible problems. Note: Batteries will not reach full charge the first time they are charged. Make sure power supply is normal house voltage, 230 volts, 50 Hz, AC only. Press down on battery pack to be sure contacts on battery pack engage properly with contacts in charger. When your battery pack becomes fully charged, the red light will turn off and the green light will turn on. After normal usage, 1 hour of charge time is required to be fully charged. [. . . ] Chuck body could slip in your hand or your hand could slip and come in contact with rotating drill bit. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. WARNING Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. [. . . ]