User manual RYOBI 130REB
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RYOBI 130REB. We hope that this RYOBI 130REB user guide will be useful to you.
Manual abstract: user guide RYOBI 130REB
Detailed instructions for use are in the User's Guide.
[. . . ] 130rEB Electric Trimmer / Edger / Blower
OPERATOR'S MANUAL
FOR QUESTIONS, CALL 1-800-345-8746 in U. S. or 1-800-265-6778 in CANADA
www. ryobi. com
IMPORTANT MANUAL
DO NOT THROW AWAY
INTRODUCTION
THANK YOU
Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. This operator's manual provides you with easy-to-understand operating instructions. [. . . ] 6).
STOPPING THE UNIT
Release the trigger to stop the trimmer.
OPERATING THE TWO-SPEED SWITCH
This unit is equipped with a two-speed switch; a powerful high speed for demanding yard work, and a precision low speed for light-duty yard work. 6).
CAUTION: Do not use the unit for demanding work with the switch in the low speed. 5
9
OPERATING INSTRUCTIONS
OPERATING THE CLICK-LINK® SYSTEM
The Click-Link® system enables the use of these optional add-ons. While firmly holding the add-on, push it straight into the Click-Link® coupler (Fig. NOTE: Aligning the release button with the guide recess will help installation (Fig. 8).
Click-Link® Coupler
Release Button Primary Hole
WARNING: Read and understand operator's manual for add-on prior to operation.
Removing the Cutting Attachment or Add-Ons: 1. While firmly holding the upper shaft housing, pull the cutting attachment or add-on straight out of the Click-Link® coupler. Installing the Cutting Attachment or Add-Ons:
Upper Shaft Housing Fig. 9).
WARNING: To avoid serious personal injury, shut unit off before removing or installing add-ons.
NOTE: To make installing or removing the add-on easier, place the unit on the ground or on a work bench. 7).
CAUTION: Lock the release button in the primary hole and securely tighten the knob before operating this unit.
90° Edging Hole
180° Edging Hole Click-Link® Coupler Release Button Knob
Fig. 7
CAUTION: The cutting attachment and addons with the Click-Link® system are to be used in the primary hole unless stated otherwise in the specific add-ons operator's manual. Using the wrong hole could lead to personal injury, or damage to the unit.
For edging when using the line head cutting attachment with Click-Link® models, lock the release button of the cutting attachment into the 90° edging hole or the 180° edging hole(Fig. The edger add-on should be installed with the release button in the primary hole.
10
OPERATING INSTRUCTIONS
HOLDING THE TRIMMER WARNING: Always wear eye, hearing, foot and body protection to reduce the risk of injury when operating this unit.
Before operating the unit, stand in the operating position (Fig. Check for the following: · The operator is wearing eye protection and proper clothing. · The right arm is slightly bent, and the hand is holding the housing grip. · The left arm is straight, and the hand is holding the D-handle. · The cutting attachment is parallel to the ground and easily contacts the vegetation to be cut without the operator having to bend over. Each time the head is bumped, about 1 inch (25. 4 mm. ) of trimming line is released. A blade in the cutting attachment shield will cut the line to the proper length if excess line is released. Line release becomes more difficult as the cutting line becomes shorter. NOTE: Do not rest the Bump Head on the ground.
CAUTION: Do not remove or alter the line cutting blade assembly. This may lead to serious personal injury or damage to the unit.
Some line breakage will occur from: · Entanglement with foreign matter · Normal line fatigue · Attempting to cut thick, stalky weeds · Forcing the line into objects such as walls or fence posts
TIPS FOR BEST TRIMMING RESULTS
· Keep the cutting attachment parallel to the ground. [. . . ] Steel Tube, Click-Link Unit Weight (with cutting attachment, cutting attachment shield and D-handle) . up to 100 MPH
18
NOTES
19
LIMITED TWO-YEAR WARRANTY
RYOBI OUTDOOR PRODUCTS warrants each new RYOBI Product for two (2) years according to the following terms. This warranty extends to the original retail purchaser only and commences on the date of original retail purchase. Any part of the RYOBI Product manufactured or supplied by RYOBI and found in the reasonable judgement of RYOBI to be defective in material or workmanship will be repaired or replaced by an authorized RYOBI service dealer without charge for parts and labor. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RYOBI 130REB
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RYOBI 130REB will begin.