User manual MCCULLOCH M11577RB

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MCCULLOCH M11577RB. We hope that this MCCULLOCH M11577RB user guide will be useful to you.


MCCULLOCH M11577RB : Download the complete user guide (6670 Ko)

You may also download the following manuals related to this product:

   MCCULLOCH M11577RB (7608 ko)
   MCCULLOCH M11577RB (7608 ko)
   MCCULLOCH M11577RB (7608 ko)
   MCCULLOCH M11577RB (7608 ko)
   MCCULLOCH M11577RB (7608 ko)
   MCCULLOCH M11577RB (7608 ko)
   MCCULLOCH M11577RB (8639 ko)
   MCCULLOCH M11577RB (8639 ko)
   MCCULLOCH M11577RB (8639 ko)
   MCCULLOCH M11577RB (8639 ko)
   MCCULLOCH M11577RB (8639 ko)
   MCCULLOCH M11577RB (8639 ko)
   MCCULLOCH M11577RB (7681 ko)
   MCCULLOCH M11577RB (7681 ko)
   MCCULLOCH M11577RB (7681 ko)
   MCCULLOCH M11577RB (7681 ko)
   MCCULLOCH M11577RB (7681 ko)
   MCCULLOCH M11577RB (7681 ko)
   MCCULLOCH M11577RB REV1 (7369 ko)
   MCCULLOCH M11577RB REV 1 (7626 ko)
   MCCULLOCH M11577RB REV 1 (6539 ko)
   MCCULLOCH M11577RB REV 1 (6539 ko)
   MCCULLOCH M11577RB REV 1 (6539 ko)
   MCCULLOCH M11577RB REV 1 (6539 ko)
   MCCULLOCH M11577RB REV 1 (6810 ko)
   MCCULLOCH M11577RB REV 1 (6810 ko)
   MCCULLOCH M11577RB REV 1 (6810 ko)
   MCCULLOCH M11577RB REV 1 (6810 ko)
   MCCULLOCH M11577RB REV 1 (6810 ko)
   MCCULLOCH M11577RB REV 1 (6810 ko)

Manual abstract: user guide MCCULLOCH M11577RB

Detailed instructions for use are in the User's Guide.

[. . . ] Please read these instructions carefully and make sure you understand them before using this machine. ⷠNever allow children or people unfamiliar with the instructions to use the lawnmower. ⷠNever mow while people, especially children, or pets are nearby. ⷠKeep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property. [. . . ] Quick lifting/lowering of the cutting unit Pull the lever backwards to quickly lift the cutting unit when passing over irregularities in the lawn, etc. During transportation the cutting unit shall be in the highest position. There are four different positions for the ignition key: OFF All electric current broken. Reverse Operation System (ROS) - Allows operation of mower deck or other powered attachment while in reverse (See section 5 - "Driving") WARNING!Never leave the key in the ignition lock when leaving the machine on its own. To release the parking brake all that is necessary is to push down the brake pedal. Do not smoke when filling with petrol or fill up when the engine is warm. The combined oil refilling cap and the oil stick is accessible when the bonnet is lifted forwards. If more oil is needed add SAE 30 oil to the "FULL " marking. SAE 5W-30 oil should be used during the winter (below freezing point). Make sure that the cutting unit is in the transport position (top position) and that the lever for connection/disconnection of the cutting unit is in the disconnection position. If the engine will not start, wait about 10 seconds before the next try. Let the ignition key return to the "ON" position when the engine has started Push the gas control to the required speed. The machine is equipped with a safety switch which immediately breaks the current to the engine if the driver leaves the seat with engine running and with the connection/disconnection in position "connection". Your machine is also equipped with a system that will not allow mower to operate if the bagger or optional rear discharge deflector is not installed properly. Choose a driving speed which suits the terrain and required cutting results. Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position. Backing up with the attachment clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. With engine running, turn ignition key counterclockwise to ROS "ON" position. WARNING: Disconnect spark plug wire to prevent accidental starting before attempting any repair, inspection, or maintenance. Check to see all bolts, nuts, and cotter pins are in place and secure. [. . . ] ⷠHold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut. Dismantle the cutting unit as described previously Engage the parking brake and work off the belt upwards from the pulley (1), the clutch pulley (2) and the engine's drive wheel (3). The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows: · NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MCCULLOCH M11577RB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MCCULLOCH M11577RB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.