User manual HASBRO WALLY GETSA WEDGIE

[. . . ] Quest' apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla direttiva 93/68/EEC. Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão corrigida pela directiva 93/68/CEE. Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por medio de la 93/68/CEE. Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som kompletteras av 93/68/EEC. Dette produktet oppfyller betingelsene i derektivene 89/336/EEC og 73/23/EEC i endringen 93/68/EEC. [. . . ] Verify the "Printer Name" is set to "HASBRO WALLY GETSA WEDGIE" and click the "Properties" button. Specify the print settings including the number of copies, media type, and print quality, and then click the "OK" button to start printing. For more information on print settings, refer to the Online Manual. BONUS SOFTWARE PhotoSuite III SE If you want to install this application onto your computer, set the supplied CD-ROM in your CD-ROM drive, and then follow the steps shown below. 1 2 Click the "Start" button, and select "Run". Type "D:\MGI\PS3\SETUP. EXE", and then click the "OK" button. (Change "D" to correspond to the letter of your CD-ROM drive. ) Follow the on-screen instructions to install PhotoSuite III SE. To use PhotoSuite III SE, Internet Explorer 4. 0 or a later version should be already installed in your computer. Internet Explorer is automatically installed when installing Sharpdesk. (See page 37) 45 OPERATION PANEL Check the names and function of the parts on the operation panel. PART NAMES AND FUNCTIONS Refer to the illustration of the operation panel on your unit. POWER button ( Paper clip tray Keep paper clips here. ) Use to turn the unit on/off. (See page 12) BRIGHTNESS/INTENSITY button ( ) Use to set the brightness and intensity. (See page 59) COPY QUALITY button/ COPY QUALITY indicators ( ERROR indicator ( ) ZOOM button ( , ) MENU button ( ARROW button , ) ) Use this button to select the required copy quality. (See page 78) Use to adjust the reduction/enlargement copy ratio setting. (See page 56) Use to change the user program settings or select maintenance programs. To change each setting, press the relevant button once, and press the or "ARROW" buttons until the desired item name appears on the first line in the display panel. Use the or "ARROW" buttons to adjust the setting values displayed on the second line of the display panel. After selecting the desired setting, press the "ENTER" button. You can switch to different setting items by pressing "PAPER SELECT", "BRIGHTNESS/INTENSITY", "ZOOM", or "MENU" buttons instead of using the or "ARROW" buttons. Example: Setting the "Paper Size" 1) Press the "PAPER SELECT" button. Ready to Copy 100% A4 0 1. Paper Type 1. Plain Paper 2) Press the or "ARROW" buttons until the "Paper Size" setting is displayed on the first line of the display panel. The "Paper Type" setting screen will switch to the "Paper Size" setting screen. 1. Paper Type 1. Plain Paper 2. Paper Size 3. A4 Repeatedly press the or "ARROW" buttons until the desired paper size appears. The value will be entered to the newly selected paper size by pressing the "ENTER" button. 2. Paper Size 3. A4 2. Paper Size 4. A5 Press "CLEAR/STOP" button ( entry. ) to exit the setting mode without making an 48 MAKING COPIES In this chapter, you will learn a variety of copying operations. NORMAL COPYING Make sure that the supplied power cord is plugged into a power source. (See page 12) The unit will automatically turn on the power when it is plugged into a power source. If the power cord is plugged into a power source and the unit is still off, press the "POWER" button ( ) to turn on the unit. When the unit is turned on, the following messages and values will appear on the display panel, and the unit will be enabled. Warming up. . . 100% A4 0 1 Make sure that the power is on. Ready to Copy 100% A4 0 2 Place the original. Refer to "ORIGINAL PLACEMENT". (See page 50) To change the original type setting, refer to "How to set the original type". [. . . ] You may not modify, network, rent, lease, loan, distribute or create derivative works based upon the Software in whole or in part. You may not electronically transmit the Software from one computer to another or over a network. 3. You may terminate this License at any time by destroying the Software and related documentation and all copies thereof. This License will terminate immediately without notice from HASBRO and/or HASBRO'S Licensors if you fail to comply with any provision of this License. [. . . ]