User manual DE DIETRICH DTV716X
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DE DIETRICH DTV716X. We hope that this DE DIETRICH DTV716X user guide will be useful to you.
You may also download the following manuals related to this product:
DE DIETRICH DTV716X (1633 ko)
DE DIETRICH DTV716X (1970 ko)
DE DIETRICH DTV716X (314 ko)
DE DIETRICH DTV716X (1157 ko)
DE DIETRICH DTV716X (320 ko)
Manual abstract: user guide DE DIETRICH DTV716X
Detailed instructions for use are in the User's Guide.
[. . . ] This will allow you to achieve an airtight seal with the worktop.
4 tion ila nt ve
Dimensions depending on your model
cm spa
ce
Attach the clips to the hob. (Depending on the model. )
19
EN
1 / INSTALLING YOUR APPLIANCE
Connection
These hobs must be connected to the mains using a socket in compliance with publication CEI 60083 or an all-pole circuit-breaker device in compliance with the installation rules in force. When power is first supplied to your hob, or after an extended power cut, an indicator light will appear on the control panel. This information will disappear after 30 seconds.
Hook-up of 220-240V
Black or grey Green/yellow Blue Brown Blue Brown
~
Green/yellow
NL N L
Phase Earth Neutral Phase Earth
32A
Neutral
16A
Hook-up of 2x230V 2L+2N
Separate the wires before connection.
Black-grey Brown Blue Green/yellow
~
- 16A
Hook-up of 400V 2N
Separate the 2 phase wires (L1 and L2) before connection.
Black-grey Brown Green/yellow Blue
~
- 16A
N1 N2 L1 L2
Neutral Phase Earth
N
Neutral
L1 L2
Phase Earth
Hook-up of 400V 3 - 16A ~
With hook-up of 400 V 2N three phase, verify that the neutral wire is properly connected.
Warning
If the cable is damaged it must be replaced by the manufacturer, its aftersales service or a person with a similar qualification to prevent danger.
20
2 / USING YOUR APPLIANCE
EN
We have designed this cooking hob for use by private individuals in their homes. [. . . ] 5 - Press the touch control "+" pr "-" on the timer to stop the beeping.
CLEAN LOCK
This function allows you to temporarily lock your hob while cleaning. - Press on the touch control briefly ; you will hear a beep and the indicator will start flashing. A double beep sounds and the indicator goes out.
To change the timer settings:
1 - Position the rotating symbol by highlighting the cooking zone you want to change. 2 - Press the touch control "+" or "-" of the timer.
To stop the timer:
1 - Position the rotating symbol by highlighting the cooking zone you want to change. 6 - Continue cooking; each new setting will be recorded as well as the cooking time. Confirm and stop the programming by pressing the stop touch control An indicator in the timer zone shows the burner you have programmed. 3 - Press and hold the touch control MEMO
Warning
When using a zone with extension, you can choose the zone only when setting the first cycle.
4- Set the power level for the first cycle for the burner you have chosen, for which you want to programme a cooking cycle. Each new power level setting is then saved as well as how long it will run for. Confirm and stop the programming by pressing the stop touch control
26
2 / USING YOUR APPLIANCE
EN
Safety while using
Residual heat
After a long cooking period, the zone used can remain hot for several minutes. Do not put your hand on the zone.
Warning
Do not touch the cooking zones, you will risk getting burned. After a prolonged power cut another indicator display may appear; it will go out after any key is pressed. However, the cooking zones may still remain hot.
Protection against spills
In case of spillage, or of a metallic object or wet cloth placed on the touch controls, the hob turns itself off, the displays light up and a beep sounds. Clean the hob or remove the object, then begin cooking again.
Auto-Stop system
If you forget cooking is in progress, after a predefined time, this safety function will automatically turn off your hob (from 1 to 10 hours depending on the power setting). A double beep confirms your setting.
Electrical danger
Ensure that the power cable of a connected electrical appliance near the hob is not in contact with the cooking zones. If a crack appears in the surface of the glass disconnect your appliance immediately to prevent a risk of electric shock. Do not use your hob until you have replaced the glass worktop.
Warning
Do not stare at the halogen lamps in the cooking zones.
27
EN
3 / MAINTAINING YOUR APPLIANCE
Preserve your appliance
The vitroceramic glass surface is highly resistant, but not unbreakable. Here are some recommendations for increasing its lifetime: - Avoid banging or clattering the cookware. - Never use aluminium foil or paper or aluminium scrubber to clean it. Aesthetic faults, as a result of mistreatment of your hob and which do not entail a lack of function, are not covered by our guarantee. And for the safety of your kitchen, do not place cleaning items or inflammable objects or products in the kitchen furniture underneath your cooking hob.
Maintaining your appliance
TYPES OF STAINS/SPOTS Light. [. . . ] Make sure you use a licensed person to install this product and ask for your Compliance Certificate.
STATEMENT OF STANDARD WARRANTY CONDITIONS
1. The Warranty only applies provided that the appliance has been used in accordance with the manufacturer's instructions and provided that the appliance has not been damaged by an accident, misuse, neglect or abuse of any person other than the manufacturer or MEA or from faulty installation, mis-adjustment or tampering by unauthorised persons. When a service inspection reveals the alleged fault or faults are caused by incorrect operation, contrary to the instruction manual, and otherwise the appliance is in good order and working condition, the purchaser shall be liable for a service fee charged by MEA or one of its' Service Providers. If the appliance is used in Commercial Applications or for Rental purposes, a separate warranty of Twelve (12) months covering all parts with Three (3) months on the labour will apply. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DE DIETRICH DTV716X
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DE DIETRICH DTV716X will begin.