User manual CANDY CDPN 1L390PX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CANDY CDPN 1L390PX. We hope that this CANDY CDPN 1L390PX user guide will be useful to you.


CANDY CDPN 1L390PX : Download the complete user guide (7883 Ko)

You may also download the following manuals related to this product:

   CANDY CDPN 1L390PX (1258 ko)
   CANDY CDPN 1L390PX (1045 ko)
   CANDY CDPN 1L390PX (595 ko)

Manual abstract: user guide CANDY CDPN 1L390PX

Detailed instructions for use are in the User's Guide.

[. . . ] We are confident it will assist you loyally in washing your daily dishes in full safety. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. We recommend you always keep this manual to hand and in good condition for any future owner. Please check that the appliance is delivered with this instruction manual, the warranty certificate, the service centre address and the energy efficiency label. [. . . ] L Both the door lining and the tank lining are in stainless steel; however, should spots caused by oxidation occur, this is probably due to a high level of iron salts presents in the water. L The spots can be removed with a mild abrasive agent; never use chlorine based materials, steel wool, etc. L If, in spite of the routine cleaning of the filters, you notice that the dishes or pans are not properly washed or rinsed, check that all the spray heads on the rotor arms (fig. If they are blocked, clean them in the 1) to remove the upper rotor arm, turn it until it lines up with the stop marked by the arrow (fig. 1) and, keeping it pushed in, unscrew it in a clockwise direction (to reassemble it repeat the same operation, but turn it anticlockwise). 2); 2) wash the rotor arms under a jet of water to clear any blockage in the spray heads. After every wash it is essential to turn off water supply and to switch off the machine by pressing the On/Off button to the off position. If the machine is not going to be used for some time, it is advisable to follow these rules: 1. Do an empty wash with detergent in order to clean the machine of any deposits; 2. If the machine is left in places where the temperature is below 0°C any water left inside the pipes may freeze. Wait until the temperature rises above zero and then wait for about 24 hours before. A ON/OFF Button B "PROGRAMME SELECTION" button/ENROLMENT Wi-Fi C "Express" option button D C+E CHILD LOCK E "START DELAY" button F Reset" button for "SALT EMPTY" light G "Start/Reset" button (start/cancel programme) H "RINSE AID EMPTY" light I "PROGRAMME STATUS" lights/"DELAY START" time lights L "OPTION SELECTION" light M "PROGRAMME SELECTION" light N "Addish" light Place settings (EN 50242) Capacity with pans and dishes Water supply pressure (MPa) PROGRAMME SELECTION Next time you switch on the AND SPECIAL FEATURES appliance L To turn the appliance on and off, press the ON/OFF button (for at least 3 seconds). At the end of the cycle, remember to switch off the appliance using the ON/OFF button, then remove the plug and close the water supply. To turn the machine on, and the "P3"programme indicator light will come on. If you have turned on the programme memorisation function, the indicator light corresponding to the last programme completed will appear on the display. First time you switch on the appliance L Connect the machine to the power supply. L Open the door, put the dishes to be washed inside, and close the door again. " buttons will be active, and all the programme indicator lights will come on for 3 sec. After this only indicator light "P3" will stay on, and all the buttons will still be active. l Choose a programme with the "PROGRAMME SELECTION" button. L If you wish to select an option, press the corresponding button (the indicator light representing the selected option will come on). L Press "Start/Reset" and a signal will sound, the indicator light corresponding to the selected programme will stay on and the wash indicator light will come on. [. . . ] The water heating element is not working correctly or the filter plate is clogged Only models without a display If malfunctions or faults occur when a programme is running, the indicator light that corresponds to the selected cycle will blink rapidly, and an intermittent audio signal will sound. In this case, turn the dishwasher off by pressing the "ON/OFF" button. After checking to make sure the water supply is open, that the drain pipe is not bent and that the siphon or filters are not clogged, set the selected program again. This dishwasher is equipped with an overflow safety device that, in the event of a problem, automatically discharges any excess water. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CANDY CDPN 1L390PX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CANDY CDPN 1L390PX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.