User manual BEKO 26WLA500S

[. . . ] 3 3-Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4-Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 5-Your new television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 6 7 6. 1-TV controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6. 2-Turning on your television for the first time and tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6. 3-Performing Digital channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6. 4-Performing Analogue channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6. 5-Electronic TV Guide (EPG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 6. 6-Program table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6. 7-Signal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6. 8-CA Module (Conditional Access) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6. 9-Active Antenna Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 7. 1-Performing the Sound settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 7. 2-Performing the Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 7. 3-Performing the timer settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 7. 4-Options menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7. 5-Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 7. 6-Other picture features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 6-Performing the initial power-on settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] After setting is complete, press the EXIT button to exit the menu. Select one of the ALL CHANNELS, FAV1, FAV2, FAV3, FAV4 lists by pressing the Up/ Down movement buttons and press OK button to confirm. 6. 6. 3- Relocating a stored channel Select the channel you want to relocate from the Program Table menu with Up/Down buttons and press the "GREEN" button on your remote control. Select the new channel number to which you would like to move the channel by pressing the Up/Down movement buttons and press the OK button. Press EXIT button to finish the setting process. 6. 6. 7- Renaming a stored analogue channel You can assign an analogue program or programs of choice the names that have a maximum of eight characters. To do this, select the analogue channel you want to rename from the Program Table menu with Up/ Down movement buttons and press the RED button on your remote control. The colour of the tab where the channel name exist will change and a green box will appear around the initial letter of the channel name; choose the desired letter, number or sign using the Up/Down movement buttons. For the next character, press the Right movement button and then select the desired letter, number or sign again with the Up/Down movement buttons. After entering all the characters, store the name you have written in the memory by pressing the OK button. To write names for any of the other programs, simply repeat the above procedure. Press MENU button to return to the previous menu or press EXIT button to exit the menu after the setting is complete. 6. 6. 4- Deleting a stored channel Select the channel you want to delete from the Program Table menu with Up/Down buttons and press the "YELLOW" button on your remote control. Press GREEN button to delete the selected channel or press RED button to delete the whole channel list. Once you pres the Green button, the selected program is deleted and the following channels are transferred to previous program number. Vivid, Natural, Cinema and Sports are default values; USER represents the values you stored in memory. 7. 2. 3-Colour Temperature Colour intensity of the picture can be adjusted with this feature. Select Colour Temperature tab from the picture menu by pressing the Up/Down buttons to activate this feature and then select one of the Cool, Normal or Warm options by pressing the Right/Left buttons. 7. 2-Performing the Picture settings 7. 2. 1-Picture Menu You can perform Picture settings by entering the Picture menu. To do this, press the MENU button on your remote control, select PICTURE menu by pressing the Right/ Left movement buttons and press the OK button. In this menu, you can select one of the titles for which you would like to perform an operation. 7. 2. 4-Tint When NTSC video is input via Scart, you may make Hue settings. The tint option is not seen in the menu when you have not input this type of a video. When a NTSC video is connected via the Scart, this option becomes active and it is available in the menu. 7. 2. 5-Advanced Picture Features You can adjust advanced picture features of your television from the Advanced Picture Settings menu under Picture menu. Picture Mode Brightness Contrast Colour Sharpness Colour Temperature PICTURE User Warm Select Back Exit DNR MPEG NR Vibrant Colour Perfect Clear Dynamic Contrast Dynamic Backlight Backlight Select PICTURE High High High High High Off You can select the desired setting by pressing the Up/Down movement buttons and adjust their levels with Right/Left movement buttons. You can adjust Picture Mode, Brightness, Contrast, Colour, Sharpness and Colour Temperature levels as you desire. You can adjust the DNR, MPEG NR, Vibrant Colour, Perfect Clear, Dynamic Contrast, Dynamic Backlight and Backlight options as you desire from Back Exit 18 7. 2. 5. 1-DNR (Noise reduction) You may reduce interference and noise formed in the picture by using this feature. Select DNR tab with the Up/Down movement buttons to activate this feature and select one of the Off, Low, Normal, High or Auto options with Right/Left movement buttons. Note: Noise reduction function is only effective in weak broadcasts. movement buttons and select one of the Auto, Daylight, Night or Off options with Right/Left movement buttons. When the Dynamic Backlight is set to Off, Backlight option becomes active. [. . . ] When you insert the module correctly, CA Module Inserted appears on the screen and the menu for this module is displayed. Rear or side view of the TV 9. 8. 2-Removing the CI Module and Smart card When removing the Smart card, make sure that you pull the CAM module out completely with the card inserted. CA Module Inserted will appear on the screen. 29 10 Help and tips Failure The television does not function Possible cause Is the power cord connected to the mains supply?Poor picture quality Antenna may be affected by two connected external devices. [. . . ]